Home

Espressif

Espressif ESP32
Espressif ESP8266
Espressif ESP8285

Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module Fully Compatible With ESP8266

Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module Fully Compatible With ESP8266

Overview: What is ESP8285? ESP8285=ESP8266+1M Flash, the bearing high temperature is 125 (the one for ESP8266 is just 85). More important, the code programmed in ESP8266 can be used for ESP8285 intactly. ESP-M3 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated a advanced Tensilica's L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi fuction, which can used independently and alsoused as a slaver with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design. Features: Ultra-small size; Support serial to WiFi; Wireless transparent transmission; Long distance transmission with ultra-low power; Bearing high temperature to 125 compared to the 85 for ESP8266. Specification: https://github.com/SmartArduino/SZDOITWiKi/wiki SOC characteristics: Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz, and RTOS; Built-in TCP/IP protocol; Built-in one-channel 10-bit high precision ADC; Outboard interface: HSPI, UART, I2C, I2S, IR Remote Controk, PWM, GPIO; Deep sleep current is 10uA, the cut-off current is smaller than 5uA; Wake,connect and transmission data package within 2ms; The consume power is smaller 1.0Mw (DTIM3) when at stand by status; Built in 1M byte for SPI Flash. WiFi characteristics: Support 802.11 b/g/n/e/I; Support Station, Soft AP, Soft AP+STA mode; Support WiFi Direct (P2P); Support CCMP (CBC-MAC, computation mode) TKIP (MIC, RC4) WAPI (SMS4) WEP (RC4) CRC etc. for hardware acceleration. P2P finding, P2P GO mode/ GC mode and P2P power manage WPA/PA2PSK and WPS; 802.11 securitycertification: pre-certification and TSN Support 802.11n (2.4GHz); 802.1h/RFC1042 frame encapsulation; Support seam less roaming; Support AT remote update and cloud update

Electronics/Audio

Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module Fully Compatible With ESP8266

3Pcs Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module

3Pcs Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module

Overview: What is ESP8285? ESP8285=ESP8266+1M Flash, the bearing high temperature is 125 (the one for ESP8266 is just 85). More important, the code programmed in ESP8266 can be used for ESP8285 intactly. ESP-M3 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated a advanced Tensilica's L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi fuction, which can used independently and alsoused as a slaver with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design. Features: Ultra-small size; Support serial to WiFi; Wireless transparent transmission; Long distance transmission with ultra-low power; Bearing high temperature to 125 compared to the 85 for ESP8266. Specification: https://github.com/SmartArduino/SZDOITWiKi/wiki SOC characteristics: Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz, and RTOS; Built-in TCP/IP protocol; Built-in one-channel 10-bit high precision ADC; Outboard interface: HSPI, UART, I2C, I2S, IR Remote Controk, PWM, GPIO; Deep sleep current is 10uA, the cut-off current is smaller than 5uA; Wake,connect and transmission data package within 2ms; The consume power is smaller 1.0Mw (DTIM3) when at stand by status; Built in 1M byte for SPI Flash. WiFi characteristics: Support 802.11 b/g/n/e/I; Support Station, Soft AP, Soft AP+STA mode; Support WiFi Direct (P2P); Support CCMP (CBC-MAC, computation mode) TKIP (MIC, RC4) WAPI (SMS4) WEP (RC4) CRC etc. for hardware acceleration. P2P finding, P2P GO mode/ GC mode and P2P power manage WPA/PA2PSK and WPS; 802.11 securitycertification: pre-certification and TSN Support 802.11n (2.4GHz); 802.1h/RFC1042 frame encapsulation; Support seam less roaming; Support AT remote update and cloud update

Electronics/Audio

3Pcs Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module

5Pcs Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module

5Pcs Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module

Overview: What is ESP8285? ESP8285=ESP8266+1M Flash, the bearing high temperature is 125 (the one for ESP8266 is just 85). More important, the code programmed in ESP8266 can be used for ESP8285 intactly. ESP-M3 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated a advanced Tensilica's L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi fuction, which can used independently and alsoused as a slaver with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design. Features: Ultra-small size; Support serial to WiFi; Wireless transparent transmission; Long distance transmission with ultra-low power; Bearing high temperature to 125 compared to the 85 for ESP8266. Specification: https://github.com/SmartArduino/SZDOITWiKi/wiki SOC characteristics: Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz, and RTOS; Built-in TCP/IP protocol; Built-in one-channel 10-bit high precision ADC; Outboard interface: HSPI, UART, I2C, I2S, IR Remote Controk, PWM, GPIO; Deep sleep current is 10uA, the cut-off current is smaller than 5uA; Wake,connect and transmission data package within 2ms; The consume power is smaller 1.0Mw (DTIM3) when at stand by status; Built in 1M byte for SPI Flash. WiFi characteristics: Support 802.11 b/g/n/e/I; Support Station, Soft AP, Soft AP+STA mode; Support WiFi Direct (P2P); Support CCMP (CBC-MAC, computation mode) TKIP (MIC, RC4) WAPI (SMS4) WEP (RC4) CRC etc. for hardware acceleration. P2P finding, P2P GO mode/ GC mode and P2P power manage WPA/PA2PSK and WPS; 802.11 securitycertification: pre-certification and TSN Support 802.11n (2.4GHz); 802.1h/RFC1042 frame encapsulation; Support seam less roaming; Support AT remote update and cloud update

Electronics/Audio

5Pcs Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module

Mini ESP-M2 ESP8285 Serial Wireless WiFi Transmission Module SerialNET MODE Fully Compatible With ESP8266

Mini ESP-M2 ESP8285 Serial Wireless WiFi Transmission Module SerialNET MODE Fully Compatible With ESP8266

Introduction: What is ESP8285? ESP8285=ESP8266+1M Flash application temperature up to 125. First and foremost the code programmed in ESP8266 could be used for ESP8295 intact. ESP-M2 module core processor is the high-performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated an advanced Tensilica's L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi function, which can be used independently and also used as a slave with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is a benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design. Features: Ultra-small size; Support serial to WiFi; Wireless transparent transmission; Long distance transmission with ultra-low power; Support outboard antenna; Bearing high temperature to 125 compared to the 85 for ESP8266. Specifications: SOC characteristics Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz and RTOS; Built-in TCP/IP protocol; Built-in one-channel 10-bit high precision ADC; Outboard interface: HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO; Deep sleep current is 10uA, the cut-off current is smaller than 5uA; Wake, connect and transmission data package within 2ms; The consumer power is smaller 1.0Mw (DTIM3) when at standby status; Built-in 1M byte for SPI Flash. WiFi characteristics Support 802.11 b/g/n/e/I; Support Station, Soft AP, Soft AP+STA mode; Support WiFi Direct (P2P); Support CCMP (CBC-MAC, computation mode) TKIP (MIC, RC4) WAPI (SMS4) WEP (RC4) CRC etc. for hardware acceleration. P2P finding, P2P GO mode/ GC mode and P2P power manage WPA/PA2PSK and WPS; 802.11securitycertification: pre-certification and TSN Support 802.11n (2.4GHz); 802.1h/RFC1042 frame encapsulation; Support seam less roaming; Support AT remote update and cloud update (OTA); Support Smart Config function (in

Electronics/Audio

Mini ESP-M2 ESP8285 Serial Wireless WiFi Transmission Module SerialNET MODE Fully Compatible With ESP8266

3Pcs Mini ESP-M2 ESP8285 Serial Wireless WiFi Transmission Module SerialNET MODE Fully Compatible With ESP8266

3Pcs Mini ESP-M2 ESP8285 Serial Wireless WiFi Transmission Module SerialNET MODE Fully Compatible With ESP8266

Introduction: What is ESP8285? ESP8285=ESP8266+1M Flash application temperature up to 125. First and foremost the code programmed in ESP8266 could be used for ESP8295 intact. ESP-M2 module core processor is the high-performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated an advanced Tensilica's L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi function, which can be used independently and also used as a slave with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is a benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design. Features: Ultra-small size; Support serial to WiFi; Wireless transparent transmission; Long distance transmission with ultra-low power; Support outboard antenna; Bearing high temperature to 125 compared to the 85 for ESP8266. Specifications: SOC characteristics Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz and RTOS; Built-in TCP/IP protocol; Built-in one-channel 10-bit high precision ADC; Outboard interface: HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO; Deep sleep current is 10uA, the cut-off current is smaller than 5uA; Wake, connect and transmission data package within 2ms; The consumer power is smaller 1.0Mw (DTIM3) when at standby status; Built-in 1M byte for SPI Flash. WiFi characteristics Support 802.11 b/g/n/e/I; Support Station, Soft AP, Soft AP+STA mode; Support WiFi Direct (P2P); Support CCMP (CBC-MAC, computation mode) TKIP (MIC, RC4) WAPI (SMS4) WEP (RC4) CRC etc. for hardware acceleration. P2P finding, P2P GO mode/ GC mode and P2P power manage WPA/PA2PSK and WPS; 802.11securitycertification: pre-certification and TSN Support 802.11n (2.4GHz); 802.1h/RFC1042 frame encapsulation; Support seamless roaming; Support AT remote update and cloud update (OTA); Support Smart Config function (inc

Electronics/Audio

3Pcs Mini ESP-M2 ESP8285 Serial Wireless WiFi Transmission Module SerialNET MODE Fully Compatible With ESP8266

5Pcs Mini ESP-M1 ESP8285 Serial Wireless WiFi Transmission Module IoT Compatible With ESP8266

5Pcs Mini ESP-M1 ESP8285 Serial Wireless WiFi Transmission Module IoT Compatible With ESP8266

Introduction: What is ESP8285? ESP8285=ESP8266+1M Flash application temperature up to 125. First and foremost the code programmed in ESP8266 could be used for ESP8295 intact. ESP-M2 module core processor is the high-performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated an advanced Tensilica's L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi function, which can be used independently and also used as a slave with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is a benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design. Features: Ultra-small size; Support serial to WiFi; Wireless transparent transmission; Long distance transmission with ultra-low power; Support outboard antenna; Bearing high temperature to 125 compared to the 85 for ESP8266. Specifications: SOC characteristics Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz and RTOS; Built-in TCP/IP protocol; Built-in one-channel 10-bit high precision ADC; Outboard interface: HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO; Deep sleep current is 10uA, the cut-off current is smaller than 5uA; Wake, connect and transmission data package within 2ms; The consumer power is smaller 1.0Mw (DTIM3) when at standby status; Built-in 1M byte for SPI Flash. WiFi characteristics Support 802.11 b/g/n/e/I; Support Station, Soft AP, Soft AP+STA mode; Support WiFi Direct (P2P); Support CCMP (CBC-MAC, computation mode) TKIP (MIC, RC4) WAPI (SMS4) WEP (RC4) CRC etc. for hardware acceleration. P2P finding, P2P GO mode/ GC mode and P2P power manage WPA/PA2PSK and WPS; 802.11securitycertification: pre-certification and TSN Support 802.11n (2.4GHz); 802.1h/RFC1042 frame encapsulation; Support seamless roaming; Support AT remote update and cloud update (OTA); Support Smart Config function (inc

Electronics/Audio

5Pcs Mini ESP-M1 ESP8285 Serial Wireless WiFi Transmission Module IoT Compatible With ESP8266

3Pcs Mini ESP-M1 ESP8285 Serial Wireless WiFi Transmission Module IoT Compatible With ESP8266

3Pcs Mini ESP-M1 ESP8285 Serial Wireless WiFi Transmission Module IoT Compatible With ESP8266

Introduction: What is ESP8285? ESP8285=ESP8266+1M Flash application temperature up to 125. First and foremost the code programmed in ESP8266 could be used for ESP8295 intact. ESP-M2 module core processor is the high-performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated an advanced Tensilica's L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi function, which can be used independently and also used as a slave with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is a benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design. Features: Ultra-small size; Support serial to WiFi; Wireless transparent transmission; Long distance transmission with ultra-low power; Support outboard antenna; Bearing high temperature to 125 compared to the 85 for ESP8266. Specifications: SOC characteristics Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz and RTOS; Built-in TCP/IP protocol; Built-in one-channel 10-bit high precision ADC; Outboard interface: HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO; Deep sleep current is 10uA, the cut-off current is smaller than 5uA; Wake, connect and transmission data package within 2ms; The consumer power is smaller 1.0Mw (DTIM3) when at standby status; Built-in 1M byte for SPI Flash. WiFi characteristics Support 802.11 b/g/n/e/I; Support Station, Soft AP, Soft AP+STA mode; Support WiFi Direct (P2P); Support CCMP (CBC-MAC, computation mode) TKIP (MIC, RC4) WAPI (SMS4) WEP (RC4) CRC etc. for hardware acceleration. P2P finding, P2P GO mode/ GC mode and P2P power manage WPA/PA2PSK and WPS; 802.11securitycertification: pre-certification and TSN Support 802.11n (2.4GHz); 802.1h/RFC1042 frame encapsulation; Support seamless roaming; Support AT remote update and cloud update (OTA); Support Smart Config function (inc

Electronics/Audio

3Pcs Mini ESP-M1 ESP8285 Serial Wireless WiFi Transmission Module IoT Compatible With ESP8266

ESP-S ESP8285 Remote Serial Port WiFi IoT Module Nodemcu LUA RC Authenticity Compatible With ESP-12F

ESP-S ESP8285 Remote Serial Port WiFi IoT Module Nodemcu LUA RC Authenticity Compatible With ESP-12F

Description: ESP-S is the enhanced version, in comparison with ESP8285-12. It has the perfect the peripheral circuit and can enhance the impedance matching. The output signal is better, both stability and anti-interference ability has been greatly promoted. For the user for the choice of ESP-12, it doesn't matter. The enhanced version ESP8285-12E is fully compatible with the firmware of ESP-12. It has the additional six pins with IO and SPI ports on the basis of the ESP-12, then develop more convenient, more widely. Feature: Model: ESP-S/ESP8285MOD ISM: 2.4GHz PA: +25dBm 802.11b/g/n More details, please visit: https://github.com/SmartArduino/SZDOITWiKi/wiki Package included: 1 x ESP-S ESP8285 Remote Serial Port WiFi IoT Module

Electronics/Audio

ESP-S ESP8285 Remote Serial Port WiFi IoT Module Nodemcu LUA RC Authenticity Compatible With ESP-12F

3Pcs ESP-S ESP8285 Remote Serial Port WiFi IoT Module Nodemcu LUA RC Authenticity Compatible With ESP-12F

3Pcs ESP-S ESP8285 Remote Serial Port WiFi IoT Module Nodemcu LUA RC Authenticity Compatible With ESP-12F

Description: ESP-S is the enhanced version, in comparison with ESP8285-12. It has the perfect the peripheral circuit and can enhance the impedance matching. The output signal is better, both stability and anti-interference ability has been greatly promoted. For the user for the choice of ESP-12, it doesn't matter. The enhanced version ESP8285-12E is fully compatible with the firmware of ESP-12. It has the additional six pins with IO and SPI ports on the basis of the ESP-12, then develop more convenient, more widely. Feature: Model: ESP-S/ESP8285MOD ISM: 2.4GHz PA: +25dBm 802.11b/g/n More details, please visit: https://github.com/SmartArduino/SZDOITWiKi/wiki Package included: 3 x ESP-S ESP8285 Remote Serial Port WiFi IoT Module

Electronics/Audio

3Pcs ESP-S ESP8285 Remote Serial Port WiFi IoT Module Nodemcu LUA RC Authenticity Compatible With ESP-12F

5Pcs ESP-S ESP8285 Remote Serial Port WiFi IoT Module Nodemcu LUA RC Authenticity Compatible With ESP-12F

5Pcs ESP-S ESP8285 Remote Serial Port WiFi IoT Module Nodemcu LUA RC Authenticity Compatible With ESP-12F

Description: ESP-S is the enhanced version, in comparison with ESP8285-12. It has the perfect the peripheral circuit and can enhance the impedance matching. The output signal is better, both stability and anti-interference ability has been greatly promoted. For the user for the choice of ESP-12, it doesn't matter. The enhanced version ESP8285-12E is fully compatible with the firmware of ESP-12. It has the additional six pins with IO and SPI ports on the basis of the ESP-12, then develop more convenient, more widely. Feature: Model: ESP-S/ESP8285MOD ISM: 2.4GHz PA: +25dBm 802.11b/g/n More details, please visit: https://github.com/SmartArduino/SZDOITWiKi/wiki Package included: 5 x ESP-S ESP8285 Remote Serial Port WiFi IoT Module

Electronics/Audio

5Pcs ESP-S ESP8285 Remote Serial Port WiFi IoT Module Nodemcu LUA RC Authenticity Compatible With ESP-12F