Home

Waveshare

Waveshare Display

Waveshare 4.2 Inch E-ink Screen Display e-Paper Module SPI Interface Black/White For Arduino Raspberry Pi

Waveshare 4.2 Inch E-ink Screen Display e-Paper Module SPI Interface Black/White For Arduino Raspberry Pi

Features: No backlight required, power off can keep the last screen display for a long time Very low power consumption, basically only consumes power when refreshing SPI control interface, can access Raspberry / Arduino / Nucleo and other main control boards Provide a complete supporting information manual (sample programs such as Raspberry/Arduino/STM32) Parameter: Working voltage: 3.3V Communication interface: 3-wire SPI, 4-wire SPI Dimensions: 90.1mm x 77.0mm x 1.18mm Display size: 84.8mm x 63.6mm Dot distance: 0.212 x 0.212 Resolution: 400 x 300 Display color: black, white Gray level: 2 Refresh power consumption: 26.4mW (typ.) Standby power consumption: 170 Interface Description: VCC: 3.3V GND: GND DIN: SPI communication MOSI pin CLK: SPI communication SCK pin CS: SPI Chip Select Pin (Active Low) DC: Data/command control pin (high level means data, low level means command) RST: External reset pin (low level reset) BUSY: Busy status output pin (low level means busy) File download: 4.2inch e-Paper Datasheet: http://www.waveshare.net/w/upload/6/6a/4.2inch-e-paper-specification.pdf Sample program: http://www.waveshare.net/w/upload/6/69/4.2inch_e-paper_module_code.7z Schematic: http://www.waveshare.net/w/upload/9/97/4.2inch_e-Paper_Schematic.pdf Image2Lcd image modulo software: http://www.waveshare.net/w/upload/3/36/Image2Lcd.7z Word extraction software: http://www.waveshare.net/w/upload/c/c6/Zimo221.7z Package includes: 1 x 4.2inch e-Paper Module 1 x Cable

Electronics/Audio

Waveshare 4.2 Inch E-ink Screen Display e-Paper Module SPI Interface Black/White For Arduino Raspberry Pi

Waveshare 128x128 LCD Display HAT Module for Raspberry Pi

Waveshare 128x128 LCD Display HAT Module for Raspberry Pi

Overview
This is an LCD display HAT for Raspberry Pi, 1.44inch diagonal, 128x128 pixels, with embedded controller, communicating via SPI interface.
Trying to add a control interface for your Pi?
Even making the Pi into a handheld game console?
This compact display would be the ideal choice.

Features
Standard Raspberry Pi connectivity, compatible with and direct-pluggable onto Raspberry Pi 2B/3B/Zero/Zero W1x joystick (5-position), 3x pushbuttons, handy and useful
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications
Driver: ST7735S
Interface: SPI
Display color: RGB, 65K color
Resolution: 128x128
Backlight: LED
Operating voltage: 3.3V
GeneralBrandWaveshareModel1.44inch LCD HAT / 1.8inch LCD ModuleQuantity1 SetForm  Color1.44inch LCD HAT / 1.8inch LCD ModuleMaterialRF4.LCDSpecificationScreen TypeLCDScreen Size1.44 / 1.8 inchResolution128x128Working Voltage3.3VEnglish Manual / SpecNoDownload Linkwww.waveshare.com/wiki/1.44inch_LCD_HAT
Packing List:
1 x LCD HAT / LCD Module1 x RPi screws pack (2pcs)Package Weight:0.042kg (0.093lb)
Package Size:10cm x 5cm x 0.8cm (3.94in x 1.97in x 0.00in)

Electronics/Wireless

Waveshare 128x128 LCD Display HAT Module for Raspberry Pi

Waveshare 240x240, 1.3inch IPS LCD display HAT For Raspberry Pi (no Pi)

Waveshare 240x240, 1.3inch IPS LCD display HAT For Raspberry Pi (no Pi)

Features
Standard Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+IPS screen, wide viewing angle, better display
High definition in small size1x joystick, 3x pushbuttons, handy and useful
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
Driver: ST7789Interface: SPIDisplay color: RGB, 65K colorResolution: 240x240Backlight: LEDOperating voltage: 3.3V
GeneralBrandWaveshareModel-Quantity1 pieceMaterialLCDSpecificationEnglish Manual / SpecNoDownload Link www.waveshare.com/wiki/1.3inch_LCD_HATPacking List1 x 1.3inch LCD HAT
2 x RPi screws

Package Weight:0.027kg (0.060lb)
Package Size:10cm x 5cm x 1cm (3.94in x 1.97in x 0.39in)

Electronics/Wireless

Waveshare 240x240, 1.3inch IPS LCD display HAT For Raspberry Pi (no Pi)

Waveshare True Color 8x8 RGB LED HAT for Raspberry Pi

Waveshare True Color 8x8 RGB LED HAT for Raspberry Pi

True color RGB LED HAT (B) for Raspberry Pi, colorful display, 8 × 8 gridOverviewThis RGB LED HAT (B) can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.

Features
Supports any revision of Raspberry Pi (directly-pluggable)
Onboard 8 × 8 RGB LED (WS2812B)
Control pin is configurable via jumpers (0Ω resistor)
Break out control pins, easy for working with other MCUs
Comes with development resources and manual (examples in Python and Web control)

Specifications
Operating voltage: 5V
Brightness: adjustable 256 levels
Color depth: 24-bit true color (8-bit for R/G/B respectively, totally 256x256x256=16777216 colors)
Data rate: 800Kbps(typ)
Dimension: 65mm × 56.2mm
Mounting hole size: 3.0mm
How to UseIn the case of working with a MCU:
5V ↔ 5V powerGND ↔ GNDDIN ↔ Signal input Demoļ¼š

GeneralBrandWaveshareModelN/AQuantity1 setMaterialRF4SpecificationEnglish Manual / SpecNoDownload Linkwww.waveshare.com/wiki/RGB_LED_HAT_(B)
Packing List:
1 x RGB LED HAT (B) 2 x RPi screwsPackage Weight:0.032kg (0.071lb)
Package Size:12cm x 8cm x 1cm (4.72in x 3.15in x 0.39in)

Electronics/Wireless

Waveshare True Color 8x8 RGB LED HAT for Raspberry Pi

Waveshare Game HAT Kit (US)

Waveshare Game HAT Kit (US)

Overview
Raspberry Pi 3 Model B+ is the improved version of Raspberry Pi 3 Model B, the key improvements include: A 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU
Dual-band 802.11ac wireless LAN and Bluetooth 4.2
Faster Ethernet (Gigabit Ethernet over USB 2.0)
Power-over-Ethernet support (with separate PoE HAT)
Improved PXE network and USB mass-storage booting
Improved thermal management  

Game HAT Features
3.5inch IPS screen, 480×320 resolution
60 frame experience, smoothly display, no more frame loss
Compatible with Raspberry Pi A+/B+/2B/3B/3B+ (Raspberry Pi Zero/Zero W/Zero WH requires another HDMI cable)
Integrates battery charge circuitry, powered from a 18650 lithium battery , plays anywhere anytime
Battery capacity indicator
Onboard speaker and earphone jack, listen to the familiar BGM from the old days
GeneralBrandWaveshareModelGame HAT (EN)Quantity1 setMaterialRF4SpecificationEnglish Manual / SpecNoDownload Link www.waveshare.com/wiki/Game_HATPacking List1 x Raspberry Pi 3 Model B+
1 x Game HAT
1 x Acrylic case
1 x HDMI connector
1 x RPi screws pack
1 x Micro SD Card 16GB
1 x Power adapter US standard 5V/3A micro
1 x Micro SD Card Reader (Extra Free)
Package Weight:0.403kg (0.888lb)
Package Size:25cm x 12cm x 5cm (9.84in x 4.72in

Electronics/Wireless

Waveshare Game HAT Kit (US)

Waveshare Barcode Scanner Module, 1D/2D Codes Reader

Waveshare Barcode Scanner Module, 1D/2D Codes Reader

OverviewThis is a small 1D/2D codes reader, by using the intelligent image recognition algorithm, it will decode the barcode or 2D code on paper or screen, fast and accurately.Through the onboard USB and UART interface, it can be directly plugged into a computer, or be easily integrated to kinds of devices due to its small form factor.FeaturesEasy to use, requires no knowledges of image recognitionDecodes various common 1D/2D codes such as Barcode, QR code etc.Onboard micro USB and UART serial port, allows to connect with computers or embedded devicesConfigurable via scanning 'configuration code'Onboard light source, works in the dark SpecificationsOperating voltage: 5VOperating current: 135mA (scanning), 58mA (standby), 2mA (sleep)Operating temperature: 0°C~60°COperating humidity: 5%~95% (Non-condensing)Communication interface: UART, USBDecodes 1D codes: Codebar, Code 11, Code 39/Code 93, UPC/EAN, Code 128/EAN128, Interleaved 2 of 5, Matrix 2 of 5, MSI Code, Industrial 2 of 5, GS1 Databar(RSS)Decodes 2D codes: QR code, Data Matrix, PDF417Light source: whiteScan angels: roll 360°, skew ±65°, pitch ±60°Field of view: 28° (horizontal), 21.5° (vertical)Dimension: 53.3mm x 21.4mm
GeneralBrandWaveshareModelBarcode Scanner ModuleQuantity1 pieceMaterialRF4SpecificationEnglish Manual / SpecNoDownload Link www.waveshare.com/wiki/Barcode_Scanner_ModulePacking ListBarcode Scanner Module x1

Electronics/Wireless

Waveshare Barcode Scanner Module, 1D/2D Codes Reader

Waveshare Li-ion Battery HAT for Raspberry Pi, 5V Output, Quick Charge (14500 Battery)

Waveshare Li-ion Battery HAT for Raspberry Pi, 5V Output, Quick Charge (14500 Battery)

Overview
The Li-ion Battery HAT integrates SW6106 power bank management chip, allows providing 5V regulated power supply to your Pi from a 14500 battery, makes the Pi becomes a portable device.
It will charge the battery as well, supports bi-directional quick charge.
This module can be used as a universal mini power bank, also works with other 5V devices.

Features
Onboard SW6106 chip, supports bi-directional quick charge, supports multi quick charge protocols like PD/QC/FCP/PE/SFCP
Lithium battery protection circuitry, provides reverse protection, over charge/discharge protection, over current protection, and short circuit protection
Onboard indicators: quick charge, warning, and power capacity

Specifications
Output voltage: 5V
Applicable battery: 3.7V 14500 lithium battery (4.2V when full charged)
GeneralBrandWaveshareModelLi-ion Battery HAT (EN)Quantity1 pieceMaterialRF4SpecificationEnglish Manual / SpecNoDownload Link www.waveshare.com/wiki/Li-ion_Battery_HATPacking List1 x Li-ion Battery HAT
1 x RPi screws pack (2pcs)
1 x 14500 Battery
Package Weight:0.08kg (0.176lb)
Package Size:10cm x 5cm x 3cm (3.94in x 1.97in x 1.18in)

Electronics/Wireless

Waveshare Li-ion Battery HAT for Raspberry Pi, 5V Output, Quick Charge (14500 Battery)

Waveshare USB HUB HAT for Raspberry Pi Zero/Zero W/3B/2B

Waveshare USB HUB HAT for Raspberry Pi Zero/Zero W/3B/2B

4 Port USB HUB HAT for Raspberry Pi, USB to UART Onboard

Overview
This is a 4 port USB hub for Raspberry Pi, provides more USB capability to your Pi, what's more, it features USB to UART converter for easy serial communication.
It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Zero / Zero W.

Features
4 USB Ports, compatible with USB2.0/1.1Onboard USB to UART, convenient for Raspberry Pi serial debugging
Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port

Specifications
Operating voltage: 5V
Dimension: 65mm × 30mm
Mounting hole size: 3.0mm
GeneralBrandWaveshareModelN/AQuantity1 setMaterialRF4SpecificationDownload Link www.waveshare.com/wiki/USB_HUB_HATPacking List1 x USB HUB HAT1 x Micro USB connector1 x Micro USB cable (120cm)1 x RPi screws pack (2Pcs)
Package Weight:0.068kg (0.150lb)
Package Size:10cm x 8cm x 1cm (3.94in x 3.15in x 0.39in)

Electronics/Wireless

Waveshare USB HUB HAT for Raspberry Pi Zero/Zero W/3B/2B

Waveshare 170 degree Fisheye Lens Camera Module for Raspberry Pi (Support 1080p Video Record)

Waveshare 170 degree Fisheye Lens Camera Module for Raspberry Pi (Support 1080p Video Record)


GeneralBrandWaveshareModelN/AQuantity1 pieceMaterialFR4, PCBSpecificationEnglish Manual / SpecYesDownload Link www.waveshare.com/wiki/RPi_Camera_(I)Packing List1 x RPi Camera (I)1 x 15-pin FFC (same sides contact)(15cm)
Package Weight:0.018kg (0.040lb)
Package Size:10.5cm x 8cm x 2.7cm (3.94in x 3.15in x 0.79in)

Electronics/Wireless

Waveshare 170 degree Fisheye Lens Camera Module for Raspberry Pi (Support 1080p Video Record)

Waveshare L293D Motor Drive Control Shield Board - Blue + Black (5V)

Waveshare L293D Motor Drive Control Shield Board - Blue + Black (5V)

Can drive 4 channel DC motor or 2-CH stepper motor at the same time; Power can be set in 5V power or adjustable power; Can drive 2-CH 1.25~6.45V DC motor if use adjustable power, chip is L293D; With ESD protection; 4-CH H bridge, each H bridge output current is 600mA, max, surge current is 1.2A



Interfaces: external power port, power input / output port, stepper motor port, DC motor port



Components: Power switch, power indicator, AMS1117-ADJ, stabilizer chip, adjustment potentiometer, ADJ output voltage, motor drive chip; LM2596-5.0; 5V liner switch power chip

 

GeneralBrandWaveshareModelL293DQuantity1 pieceForm ColorBlue + Black + Multi-ColoredMaterialSemi-conductor + PCBSpecificationRate Voltage5VPower Range5~9VInput Voltage5~9VWorking Current600mA~1.2AEnglish Manual / SpecNoDownload Link http://www.waveshare.net/downloads/accBoard/Motor-Control-Shield.7zPacking List1 x Board
2 x Heatsinks
Package Weight:0.042kg (0.093lb)
Package Size:5.7cm x 5.3cm x 2cm (1.97in x 1.97in x 0.79in)

Electronics/Wireless

Waveshare L293D Motor Drive Control Shield Board - Blue + Black (5V)